Vacuum Pressure Transducer Sender Sensor Fit for Air / Water / Oil / Fuel USA

Description

Warranty:3 Year
Store category
Sign Up Now !
You may also like
Vacuum Pressure Transducer Sender Sensor Fit for Air / Water / Oil / Fuel USA
Product Description
Note: Customizing for Specific Quantity!
-14.5-30psi
Description:
·Brand new vacuum pressure transducer. Stainless steel body.
·Input: -14.5 psi (-1.0 bars) to 30 psi (2.0 bars).
·Output: 0.5V -4.5V linear voltage output.
·Works for boost vacuum chamber, oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Accuracy: within 0.5% of reading (full scale).
·Thread: 1/8” 27 NPT.
·Wiring connector: water sealed quick disconnect. Mating connector is included.
·Wiring: Red: +5V; Black: ground; Green: signal output;
·It is an advance pressure sender than traditional mechanical pressure sender.
·Our material is using top of line 316 stainless steel and high temperature auto-graded plastic.
·Brand new pressure transducer. 316 Stainless steel body.
----------------------------------------------------------------------------------------------------------------------------
100psi:
Features:
·Stainless steel body.
·100% brand new and high quality,Durable.
·Installation instructions not included, Tool not included.
·Input: 0-100 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
·Current draw: less than 4 mA.
·Accuracy: within 1.5% of reading (full scale).
·Burst (over or max pressure) pressure: minimum 200 psi.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
·It is an advance pressure sender than traditional mechanical pressure sender.
Package includes:
1 * Pressure transducer (100psi)
----------------------------------------------------------------------------------------------------------------------------
150psi:
Features:
·Stainless steel body.
·100% brand new and high quality,Durable.
·Input: 0-150 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V.
·Current draw: less than 4 mA.
·Accuracy: within 1.5% of reading (full scale).
·Burst (over or max pressure) pressure: minimum 300 psi.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
·It is an advance pressure sender than traditional mechanical pressure sender.
Package includes:
1 * Pressure transducer (150psi)
-----------------------------------------------------------------------------------------------------------------------------
300psi:
Features:
·Stainless steel body.
·100% brand new and high quality,Durable.
·Input: 0-300 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V.
·Current draw: less than 4 mA.
·Burst (over or max pressure) pressure: minimum 600 psi.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Accuracy: within 1.5% of reading (full scale).
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer (300psi)
------------------------------------------------------------------------------------------------------------------------------
15psi:
Features:
·Stainless steel body.
·100% brand new and high quality,Durable.
·Input: 0-15 psi.
·Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 7.5 psi outputs 2.5V, 15 psi outputs 4.5V.
·Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
·Accuracy: within 1.5% of reading (full scale).
·Current draw: less than 4 mA.
·Burst (over or max pressure) pressure: minimum 100 psi.
·Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
·Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
·Wiring: Red for +5V. Black for ground. Blue for signal output.
·Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
·This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer (15psi)
---------------------------------------------------------------------------------------------------------------------
150PSI/12V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-150 psi.
· Power: 12V (10V-25V wide power range).
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 300 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +12V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
-----------------------------------------------------------------------------------------------------------------------------
100PSI/12V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-100 psi.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Thread: 1/8”-27 NPT.
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +12V. Black for ground. Blue for signal output.
· It is an advance pressure sender than traditional mechanical pressure sender.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
Package includes:
1 * Pressure transducer
----------------------------------------------------------------------------------------------------------------------
200psi/5V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-200 psi.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 200 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 400 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
-----------------------------------------------------------------------------------------------------------------------
80psi/5V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-80 psi.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 40 psi outputs 2.5V, 80 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 200 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
--------------------------------------------------------------------------------------------------------------------------
500psi/12V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-500 psi.
· Power: 12V (10V-25V wide power range).
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 250 psi outputs 2.5V, 500 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 1000 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
---------------------------------------------------------------------------------------------------------------------------
300psi/12V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-300 psi.
· Power: 12V (10V-25V wide power range).
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 600 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +12V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
-----------------------------------------------------------------------------------------------------------------
2500psi/5V
Features:
· Stainless steel body.
· 100% brand new and high quality,Durable.
· Installation instructions not included, Tool not included.
· Input: 0-2500 psi.
· Power: +5V tp 12V range, it takes wide range.
· Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 1250 psi outputs 2.5V, 2500 psi outputs 4.5V.
· Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
· Accuracy: within 1.5% of reading (full scale).
· Current draw: less than 4 mA.
· Burst (over or max pressure) pressure: minimum 3000 psi.
· Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
· Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
· Wiring: Red for +5V. Black for ground. Blue for signal output.
· Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
· This is a high quality pressure sender, with ceramic pressure chip sensor inside.
Package includes:
1 * Pressure transducer
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On Jun-27-21 at 20:36:10 PDT, seller added the following information: